Transform SOP
Summary[edit]
The Transform SOP translates, rotates and scales the input geometry in "object space" or local to the SOP. The Model Editor and the Transform SOP both work in "object space", and change the X Y Z positions of the points. In contrast, animating the transformation channels of an object in the Geometry Viewer Pane moves/scales the entire object in "world space" and does not affect the XYZ point positions of the geometry.
Parameters  Transform Page
Group group
 If there are input groups, specifying a group name in this field will cause this SOP to act only upon the group specified. Accepts patterns, as described in Pattern Matching.
Transform Order xord
 ⊞  Sets the overall transform order for the transformations. The transform order determines the order in which transformations take place. Depending on the order, you can achieve different results using the exact same values. Choose the appropriate order from the menu.
 Scale Rotate Translate
srt

 Scale Translate Rotate
str

 Rotate Scale Translate
rst

 Rotate Translate Scale
rts

 Translate Scale Rotate
tsr

 Translate Rotate Scale
trs

Rotate Order rord
 ⊞  Sets the order of the rotations within the overall transform order.
 Rx Ry Rz
xyz

 Rx Rz Ry
xzy

 Ry Rx Rz
yxz

 Ry Rz Rx
yzx

 Rz Rx Ry
zxy

 Rz Ry Rx
zyx

Translate t
 ⊞  These three fields move the Source geometry in the three axes.
 X
tx

 Y
ty

 Z
tz

Rotate r
 ⊞  These three fields rotate the Source geometry in the three axes.
 X
rx

 Y
ry

 Z
rz

Scale s
 ⊞  These three fields scale the Source geometry in the three axes.
 X
sx

 Y
sy

 Z
sz

Pivot p
 ⊞  The pivot point for the transformations (not the same as the pivot point in the pivot channels). The pivot point parameters allow you to define the point about which geometry scales and rotates. Altering the pivot point produces different results depending on the transformation performed on the object.
For example, during a scaling operation, if the pivot point of an object is located at: 1, 1, 0
and you wanted to scale the object by 0.5
(reduce its size by 50%) the object would scale toward the pivot point and appear to slide down and to the left.
In the example above, rotations performed on an object with different pivot points produce very different results.
Tip: In order to transform from the Bounding Box centre, simply enter the variables $CEX $CEY $CEZ
into the Pivot parameter.
 X
px

 Y
py

 Z
pz

Uniform Scale scale
 Uniform Scale allows you to shrink or enlarge geometry along all three axes simultaneously.
Normals Maintain Length vlength
 When selected, vector type attributes (i.e. normals, velocity) maintain the same length under transforms. i.e. When geometry is scaled, the normals remain constant in length.
Look At lookat
 Allows you to orient your object by naming the object you would like it to Look At, or point to. Once you have designated this object to look at, it will continue to face that object, even if you move it. This is useful if, for instance, you want a camera to follow another object's movements. The Look At parameter points the object in question at the other object's origin.
Tip: To designate a centre of interest for the camera that doesn't appear in your scene, create a Null object and disable its display flag. Then Parent the Camera to the newly created Null object, and tell the camera to look at this object using the Look At parameter. You can direct the attention of the camera by moving the Null object with the Select state. If you want to see both the camera and the Null object, enable the Null object's display flag, and use the Select state in an additional Viewport by clicking one of the icons in the topright corner of the TouchDesigner window.
Up Vector upvector
 ⊞  When orienting an object, the Up Vector is used to determine where the positive Y axis points.
 X
upvectorx

 Y
upvectory

 Z
upvectorz

Parameters  Post Page
The transforms on this page are apllied after the settings made on the Transform page (see above).
Post Translate X posttx
 ⊞  Sets the center of the geometry after the Transform page has been applied.
 Off
off
 No Change.
 Origin
origin
 Moves the geometry to the origin 0,0,0.
 Reference Input
reference
 Moves the geometry to a location based on the Reference Input supplied to this SOP's second input (ie. Input 1).
From Input fromx
 ⊞  Determines which part of the input geometry to align to the Origin or Reference Input as selected in Post Translate parameter above.
 Min
min
 Align to the geometry's minimum bounds in this axis.
 Center
center
 Align to the geometry's center point in this axis.
 Max
max
 Align to the geometry's maximum bounds in this axis.
To Reference tox
 ⊞  When using Reference Input this determines which part of the Reference Input to align the geometry to.
 Min
min
 Align to the Reference Input's minimum bounds in this axis.
 Center
center
 Align to the Reference Input's center in this axis.
 Max
max
 Align to the Reference Input's maximum bounds in this axis.
Post Translate Y postty
 ⊞  Sets the center of the geometry after the Transform page has been applied.
 Off
off
 No Change.
 Origin
origin
 Moves the geometry to the origin 0,0,0.
 Reference Input
reference
 Moves the geometry to a location based on the Reference Input supplied to this SOP's second input (ie. Input 1).
From Input fromy
 ⊞  Determines which part of the input geometry to align to the Origin or Reference Input as selected in Post Translate parameter above.
 Min
min
 Align to the geometry's minimum bounds in this axis.
 Center
center
 Align to the geometry's center point in this axis.
 Max
max
 Align to the geometry's maximum bounds in this axis.
To Reference toy
 ⊞  When using Reference Input this determines which part of the Reference Input to align the geometry to.
 Min
min
 Align to the Reference Input's minimum bounds in this axis.
 Center
center
 Align to the Reference Input's center in this axis.
 Max
max
 Align to the Reference Input's maximum bounds in this axis.
Post Translate Z posttz
 ⊞  Sets the center of the geometry after the Transform page has been applied.
 Off
off
 No Change.
 Origin
origin
 Moves the geometry to the origin 0,0,0.
 Reference Input
reference
 Moves the geometry to a location based on the Reference Input supplied to this SOP's second input (ie. Input 1).
From Input fromz
 ⊞  Determines which part of the input geometry to align to the Origin or Reference Input as selected in Post Translate parameter above.
 Min
min
 Align to the geometry's minimum bounds in this axis.
 Center
center
 Align to the geometry's center point in this axis.
 Max
max
 Align to the geometry's maximum bounds in this axis.
To Reference toz
 ⊞  When using Reference Input this determines which part of the Reference Input to align the geometry to.
 Min
min
 Align to the Reference Input's minimum bounds in this axis.
 Center
center
 Align to the Reference Input's center in this axis.
 Max
max
 Align to the Reference Input's maximum bounds in this axis.
Post Scale postscale
 ⊞  Sets the scale of the geometry after the Transform page has been applied.
 Per Axis
peraxis
 Allows individual settings for each axis using the parameters below.
 Unity
unity
 Scales the geometry to fit in a 1,1,1 bounding box.
 Reference
reference
 Scales the geometry to fit the Reference Input's bounding box (second input on this SOP ie. Input 1).
Post Scale X postscalex
 ⊞  Sets the scale of the geometry after the Transform page has been applied to scale.
 Off
off
 No change the the scale in this axis.
 Unity
unity
 Scale the geometry to 1.0 (ie. 0.5 to 0.5) in this axis.
 Reference Input
reference
 Scale the geometry to fit the Reference Input in this axis.
 Unity Proportional
unityprop
 Scale the geometry to 1.0 (ie. 0.5 to 0.5) in this axis while keeping the input geometry's original proportions.
 Reference Proportional
referenceprop
 Scale the geometry to fit the Reference Input in this axis while keeping the input geometry's original proportions.
Post Scale Y postscaley
 ⊞  Sets the scale of the geometry after the Transform page has been applied to scale.
 Off
off
 No change the the scale in this axis.
 Unity
unity
 Scale the geometry to 1.0 (ie. 0.5 to 0.5) in this axis.
 Reference Input
reference
 Scale the geometry to fit the Reference Input in this axis.
 Unity Proportional
unityprop
 Scale the geometry to 1.0 (ie. 0.5 to 0.5) in this axis while keeping the input geometry's original proportions.
 Reference Proportional
referenceprop
 Scale the geometry to fit the Reference Input in this axis while keeping the input geometry's original proportions.
Post Scale Z postscalez
 ⊞  Sets the scale of the geometry after the Transform page has been applied to scale.
 Off
off
 No change the the scale in this axis.
 Unity
unity
 Scale the geometry to 1.0 (ie. 0.5 to 0.5) in this axis.
 Reference Input
reference
 Scale the geometry to fit the Reference Input in this axis.
 Unity Proportional
unityprop
 Scale the geometry to 1.0 (ie. 0.5 to 0.5) in this axis while keeping the input geometry's original proportions.
 Reference Proportional
referenceprop
 Scale the geometry to fit the Reference Input in this axis while keeping the input geometry's original proportions.
Operator Inputs
 Input 0 
 Input 1 
TouchDesigner Build:
SOPs 

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 
An Operator Family that reads, creates and modifies 3D polygons, curves, NURBS surfaces, spheres, meatballs and other 3D surface data.
A 3D viewport for viewing and manipulating 3D scenes or objects interactively. A geometry viewer can be found in Panes (alt+3 in any pane) or the Node Viewers of all Geometry Object components.
A 3D viewport for viewing and manipulating 3D scenes or objects interactively. A geometry viewer can be found in Panes (alt+3 in any pane) or the Node Viewers of all Geometry Object components.
A Link.