Lookup CHOP

From Derivative
Jump to navigation Jump to search

Summary
[edit]

The Lookup CHOP outputs values from a lookup table. The first input (the Index Channel) is an index into the second input (the Lookup Table). Lookup outputs interpolated values from the lookup table.

Both the Index and Lookup Tables can contain any number of channels.

An Index sample with value 0 maps to the beginning (first sample) of the lookup table, and an index sample with value of 1 maps to the end (last sample) of the lookup table.

The output CHOP is the same length as the Index input. It is the same number of channels as the Lookup Table input, and has the same channel names as the Lookup Table input. The output is filled with the data extracted from the lookup tables. Indexes that fall between two lookup table samples are interpolated. The lookup table can be sampled outside its range.

NOTE: The Extend Conditions of the lookup table are used in this case where the index is less than 0 or greater than 1.

The sample rate of the output is the sample rate of the Index input.

The Lookup CHOP can be used to fetch values from a color lookup table, where a single index produces red, green and blue channels. It can also be used for rolloff or decay tables, where it specifies how much a parameter drops with distance.

PythonIcon.pnglookupCHOP_Class


Parameters - Lookup Page

Index Range index - - The Index Range maps the index channel's values to the lookup table's start and end and defaults to 0 and 1. The first parameter represents the start of the lookup table. When the index channel has this value, it will index the start of the lookup table. The second parameter represents the end of the lookup table and behaves in the same way.

  • index1 -
  • index2 -

Cyclic Range cyclic - - Adapts the range of the Lookup Table (2nd input) for cyclic or non-cyclic input indices. When using a cyclic input index (1st input), the lookup value for index 0.0 and 1.0 result in the same value. To avoid this, set Cyclic Range to Yes and the lookup will cycle smoothly.

  • Automatic auto - Checks the right extend condition of each channel (Assumes type cycle and mirror are cyclic lookups).
  • Yes yes - For looking up a cyclic output (oscillator, beat driven output etc).
  • No no - For looking up a single wave (slider mapping, etc).

Per Index Channel chanmatch - - Determines how index channels are mapped to lookup Channel tables.

  • One Lookup Table Channel onetoone - The first index channel is matched to the full lookup table.
  • All Lookup Table Channels onetomany - Each index channel is matched with every lookup table.

Match by match - - Determines how index channels are matched with a lookup channel in 'One Lookup Table Channel' mode.

  • Channel Number index - An index channel is matched to a lookup table by its index within the clip. Lookup tables are cycled if there are few of them than index channels.
  • Channel Name name - An index channel is matched to a lookup table by name. Unmatched index channels are left "as is".

Interpolate interp - When on, the input can be interpolated between samples. When off, the nearest sample is used.


Parameters - Common Page

Time Slice timeslice - Turning this on forces the channels to be "Time Sliced". A Time Slice is the time between the last cook frame and the current cook frame.

Scope scope - To determine which channels get affected, some CHOPs use a Scope string on the Common page.

Sample Rate Match srselect - - Handle cases where multiple input CHOPs' sample rates are different. When Resampling occurs, the curves are interpolated according to the Interpolation Method Option, or "Linear" if the Interpolate Options are not available.

  • Resample At First Input's Rate first - Use rate of first input to resample others.
  • Resample At Maximum Rate max - Resample to the highest sample rate.
  • Resample At Minimum Rate min - Resample to the lowest sample rate.
  • Error If Rates Differ err - Doesn't accept conflicting sample rates.

Export Method exportmethod - - This will determine how to connect the CHOP channel to the parameter. Refer to the Export article for more information.

  • DAT Table by Index datindex - Uses the docked DAT table and references the channel via the index of the channel in the CHOP.
  • DAT Table by Name datname - Uses the docked DAT table and references the channel via the name of the channel in the CHOP.
  • Channel Name is Path:Parameter autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.

Export Root autoexportroot - This path points to the root node where all of the paths that exporting by Channel Name is Path:Parameter are relative to.

Export Table exporttable - The DAT used to hold the export information when using the DAT Table Export Methods (See above).


Operator Inputs

  • Input 0 -
  • Input 1 -

TouchDesigner Build:

CHOPs
Ableton Link • Analyze • Angle • Attribute • Audio Band EQ • Audio Device In • Audio Device Out • Audio Dynamics • Audio File In • Audio File Out • Audio Filter • Audio Movie • Audio NDI • Audio Oscillator • Audio Para EQ • Audio Play • Audio Render • Audio Spectrum • Audio Stream In • Audio Stream Out • Beat • Bind • BlackTrax • Blend • Blob Track • Bullet Solver • Clip Blender • Clip • Clock • Composite • Constant • Copy • Count • CPlusPlus • Cross • Cycle • DAT to • Delay • Delete • DMX In • DMX Out • Envelope • EtherDream • Event • Expression • Extend • Fan • Feedback • File In • File Out • Filter • FreeD • Function • Gesture • Handle • Helios DAC • Hog • Hokuyo • Hold • Import Select • In • Info • Interpolate • Introduction To CHOPs id • Inverse Curve • Inverse Kin • Join • Joystick • Keyboard In • Keyframe • Kinect Azure • Kinect • Lag • Laser • Leap Motion • Leuze ROD4 • LFO • Limit • Logic • Lookup • LTC In • LTC Out • Math • Merge • MIDI In • MIDI In Map • MIDI Out • Mouse In • Mouse Out • NatNet In • Ncam • Noise • Null • Object • Oculus Audio • Oculus Rift • OpenVR • OSC In • OSC Out • Out • Override • Panel • Pangolin • Parameter • Pattern • Perform • Phaser • Pipe In • Pipe Out • PosiStageNet • Pulse • RealSense • Record • Rename • Render Pick • Reorder • Replace • Resample • S Curve • Scan • Script • Select • Sequencer • Serial • Shared Mem In • Shared Mem Out • Shift • Shuffle • Slope • SOP to • Sort • Speed • Splice • Spring • Stretch • Stype • Switch • Sync In • Sync Out • Tablet • Time Slice • Timeline • Timer • TOP to • Touch In • Touch Out • Trail • Transform • Transform XYZ • Trigger • Trim • Warp • Wave • WrnchAI • ZED